Recent content by baybe

Using a Unitec POS 4000 V2, I just recently hooked my 2 Bay Automatics (Unitec Wash Select II) to a C-Store which uses Pinnacle Palm Pos for register/pump sales. The POS 4000 is considered the site controller and is titled Unit 1. My 2 Wash Select II's are titled Unit 2 and Unit 3 respectively...

I actually have switched the whisker switches between the PS and DS and still continue to get the same fault on the PS arm (PS Breakaway) and also (check Butterfly Prox). Sometimes the arm actually hits and at other times it makes no contact. I have checked the connectors in the distribution...

Both. It is very inconsistent. The arms sometime seem to creep into the mirror and at other times it just faults with no contact to the vehicle.

Thanks! I will give that a try.

I keep having an intermittent problem with my Vector IBA showing passenger side breakaway fault. The problem began about 3 weeks ago and was happening about once in every 25 cars. The first time it happened, the arm actually hit the passenger mirror and faulted. Several other times it faults...