Sonnys Blower Nozzles

[packerscw]

What nozzles seem to overall work the best on sonnys blowers? When mounted overhead

Thank you

 

[washnshine]

Are you talking about for side drying, or overheads? I like the mammoth for the sides and duck bill for twin blowers on the top center. The round or rectangular extension is good for blowers mounted in such a way that they aim down at a 45° angle from the top corners of the arch. They will get a cross section of the top and upper sides of the vehicle.

 

[packerscw]

Yes talking about overhead mounted. Just looking for feedback on all the different nozzles people have liked and used.

 

[washnshine]

Duck bill for double overhead, round for single overhead. V- shape for flash dry immediately after drying agent final rinse.

 

[CAR WASH GUY]

I like to have multiple duck bills spread apart, and some circular nozzles overhead in order to blow air at a higher velocity. I also have quick flip nozzles for the overhead. But besides the Mammoths, I have rectangular nozzles for the sides.

 

[CAR WASH GUY]

I like to have multiple duck bills spread apart, and some circular nozzles overhead in order to blow air at a higher velocity. I also have quick flip nozzles for the overhead. But besides the Mammoths, I have rectangular nozzles for the sides.

Also I forgot to mention 1 v-nozzle and 2 double v-nozzles.BTW I have these DIRECTLY after the drying agent is applied.

 

[AnalyticWash]

Any chance someone with a Sonny's V nozzle can measure the inside dimensions of the attachment side opening? I want to try and retrofit these to a Premier producer.

 

[packerscw]

Any chance someone with a Sonny's V nozzle can measure the inside dimensions of the attachment side opening? I want to try and retrofit these to a Premier producer.

single V is about 11" X 10"