RO filter housing

[n00bie]

Does anyone know the brand or where to buy this RO filter housing? Mine does say any brand/model. It's 10" tall and 2 open top holes for gauges. I looked everywhere and bought one but 2 top holes are closed. That hard freeze got me good ;(

 

[mac]

Try Charger Water out of Ft Myers, FL.

 

[n00bie]

Hi mac,
They don't have it either. I might have to create something
Thanks mac

 

[PrecisionPyro]

If the new universal one you got fits otherwise, and has the spot for them, why not drill and tap the gauge holes?

 

[Lrosales]

The same happened to me. I bought it from Grainger in Dallas Tx but you can order it online at grainger.com they have different sizes I also needed a 10 ”but the opening was 3/8 and they had a 3/4 so I put a bushing 3/4 to 3/8. Pentair/Pentek filter housing.

 

[Kevin James]

Does anyone know the brand or where to buy this RO filter housing? Mine does say any brand/model. It's 10" tall and 2 open top holes for gauges. I looked everywhere and bought one but 2 top holes are closed. That hard freeze got me good ;(

Why don't you drill out the hole retap it and epoxy in a brass bushing or try to epoxy a bushing into the damaged port.