What's new

Dixmor DX2000-2 V2.05

SanDiegoSS

Member
Joined
Apr 24, 2019
Messages
31
Reaction score
6
Points
8
Closed down a bay yesterday to replace a pump. when we turned it back on the Dimmer timer just reads" Dimmer DX2000 - 2 V2.05" and doesn't work. We have cycled power and have looked through the manual.

Anyone know what could be causing this or is likely just an old timer that has lived its life?
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,667
Reaction score
3,933
Points
113
Location
Texas
It has most likely lost programming and needs to be set up again. You should be able to reprogram it with a remote - if you don't have one you'll need to open it and do it manually with the buttons. It will lose its programming every time the bay is off too long until the battery is replaced.
 

Keith Baker

Keith Baker
Joined
Sep 19, 2007
Messages
202
Reaction score
95
Points
28
Location
Omaha, NE.
I purchased their Infokey. It keeps my settings and custom message stored and can be plugged into the timer when the stored program gets lost. A real time saver from doing it manually.
 
Top