What's new

D&S 5000 in bay signage...

ShineShed

Member
Joined
Mar 15, 2020
Messages
39
Reaction score
5
Points
8
Ok sorry for this long post in advance...My 5000 system does not turn the green “go” light on when the wash is completed to tell customer to exit although it does say exit on the lit up sign. However the green go light does come on for entering the bay. Checked it out and theres no wire going from the “exit” instruction light to the green light up above on the dryer i thought this was weird. So i jumpered a wire inside the lit up instruction sign so now the green light comes on to tell ppl when to exit and when someones enters until they reach treadle then obviously goes to red. Problem is now the enter and exit signs are on at same time no matter if theyre entering or exiting due to the jumper wire. Anyone else do somethin different or even installed a totally diff instruction sign inside the bay??
 
Top