What's new

Coleman Hanna Car Wash Tracks

66carwash

New member
Joined
Jan 8, 2017
Messages
6
Reaction score
0
Points
1
Location
Kernersville NC
Does anyone have a repair for rails that are getting dips in them? We are looking at replacing some rails but were wondering if there was an alternative repair out there.
 

Greg Pack

Wash Weenie
Joined
Sep 3, 2007
Messages
2,399
Reaction score
56
Points
48
Location
Hoover, Alabama
I can't find the thread, but a couple years ago I had a local machine shop/welding place come out and weld 3/8" strips of steel on top of my existing track. It cost around $1000 to do this and it smoothed the machine out nicely. They used high manganese steel which is supposed to be highly wear resistant.
 

66carwash

New member
Joined
Jan 8, 2017
Messages
6
Reaction score
0
Points
1
Location
Kernersville NC
I can't find the thread, but a couple years ago I had a local machine shop/welding place come out and weld 3/8" strips of steel on top of my existing track. It cost around $1000 to do this and it smoothed the machine out nicely. They used high manganese steel which is supposed to be highly wear resistant.
Greg, Thank you. That is good information.
 
Top