Search results

Hi All, I'm sorry if this question has been asked and answered (I imagine it has but I can't find the thread). I have an old AMTT that arms my Softgloss XS and want to replace it with a newer pay station but can't be sure which are compatible with the softgloss. The AMTT itself works well and...

It seems the codes were indicating secondary symptoms of the cause. Now that we have changed out the reducer gears, bushings and motor wheels on both sides the softgloss is running like a top. The reducers had a lot of metal debris in the gear boxes and looked worn. After changing out the...

As you suggested I tried rocking the wash and there is significant gear resistance on the drivers side and it rolls freely (except for the machine twisting) on the passenger side. The key on the passenger side is backed out a little further than the other side but, while trying to back out the...

Hi Again, A couple of weeks and a couple of prox switches later the machine has started failing with code 14 again. I was lucky enough to watch it fail today and during the wash when it happened the wheel motors seemed a bit jerky (that's what drew my attention). When the error occured the...

You were right, the face of the prox switch did look shaved once I removed it. It's replaced now and I've run a few cars through without issue. I'm not going to jynx it until I've had a chance to sacrifice a couple of chickens to the machine also, but so far ... Thanks!

Yes, the sequence code is 0000 for all errors except the 8811 that has sequence code 0122. Does this mean replace end stop prox switch?

Hello, thanks for the quick reply. Fortunately I have an HPP. The last 8 diagnostic codes (most recent first) are: 8FFF 8812 8FFF 8812 8FFF 8811 8FFF 8812 Usually the machine stops about about 1" - 2" from the end bumper, it stops about 8" from the bumper when we get the code 14. Thanks for...

Hello Softgloss whisperers, I have a softgloss xs that has been sporadically stopping and giving me a code 14 over the past few days. Some days it works flawlessly, other days I'll get these errors. I have checked there are no foreign items on the track, cleaned the switch and adjusted it...

Moved to own thread

Thanks for the reply. Although we couldn't recreate the error toggling the outputs, we were lucky that a sedan pulled in and we could cause the failure. Applying a little push to the left rear arm gave the upper brush enough energy to return home. We changed out the top brush and rear return...

Did you resolve this? I'm having this exact problem and hoping a bump will bring an answer from the aether. Please!

Darin, Thank you for your help (and patience). We’ve run over 100 washes through now without issue. Now I’m just trying to resolve my clear coat problem. Cheers!

Hello again, I’d really appreciate some help troubleshooting my Softgloss XS clear coat issue; it’s not pumping. I don’t have arches. Here’s where I am so far: At amtt: Tried enabling Clear coat option 1 Tried enabling clear coat option 2 In chem room: Clear coat pump replaced and working...

Thanks again for quick reply. The hots on the input side of plc: 0; 7; 11; 20; 21; 23; 26; 45; 47. Outputs are: 3; 14; 65. I have wiper / on board dryer, no wheel scrubs, pressure switch at entrance (before undercar), photoeye on board trolley (x20). X5 is hot when I pull top brush down. Not...

Thanks, I will definitely do that when the 33 error is cleared.

Thank you for your reply. I’ve done the network test (both pass). The screen status is “SWKE”. Unfortunately, these are the only tests I can perform as I’ve now got a persistent code 33 error that I cannot reset (machine is home and próx switch is working and input 7 on plc is hot). During the...

Hello, this is my first post I hope someone can point me in the right direction. We have been repairing our softgloss xs and amtt (both went through a flood and now we have all new internals in amtt; new plc / program etc in wash). Both appear to operate perfectly ... except. After a normal...