Search results

As mentioned before, from the top of the arch to the 90 degree swivel.....including the bearing and housing.....which is everything.

Can you ping 192.168.55.101 using a command prompt? on your computer, go to start, and type in "cmd" without quotes and when that black box opens type this where you see the blinking cursor "ping 192.168.55.101" and hit enter on the keyboard. If it comes back with "replied" in seconds then it's...

I got there yesterday and began setting up and logged in only to find the drives had initialized over night on their own. I only had to run config. 7 for the arch to fine it's position. I buttoned everything up and began running test washes. This site only has three washes and I began testing...

So I spent all day there yesterday going on more senior techs advice replacing the analog prox cable and routing it through the original polytubing and installing a new bridge node. The another problem pops up as the arch rotate drive won't initialize. I was on the phone with PDQ and we checked...

I service all types of washes and have recently seen two 360's exhibit some strange "Arch lost position errors". These have been rebuilt from the arch up to the 90 degree swivel. It can go weeks without showing up and/or it can happen for a few days on end. The analog prox has been adjusted and...

Are you getting the login screen?

I have a customer that was asking about air chamois/hand held dryers for his self serve bays. I personally don't have any experience installing or servicing them. There are two versions he is looking at, the 3 phase motor style and the 3 single phase motor type. I'm sort of looking for pros and...

He texted me and said he received a Page 55 and went and checked it out and it washes fine.

Turns out it was a intermittent relay base for Y40......weird I know but once I cleared that up, everything else cleared up also. Thanks for everyone that replied.

I have a customer that keeps receiving pager code 55 after every wash and he says if washes are stacked, it takes about 3-4 minutes before it will allow next car in. I know pager code 55 means the auto return has been completed. Anybody run into this before?

Thats what I ended up doing and it went fine. Thank you for your reply.

Anyone have a sure fire method for replacing a bridge echain on a 360?

Thanks

Can that be expanded on?

I considered that but what comes off the RO unit is 8 ppm TDS and 1 Hardeness. I wondering if the water treatment plant is using something in the water. Customer did say that the pre-filter for the RO was really dirty when changed a few days ago.

Has anyone ever seen an issue with Lustra 030 and 505 combined turning into a green granular substance in soap lines? I have seen this combo used numerous sites but have never seen this occur before. I'm thinking perhaps there is something added to the municipal water supply that is reacting...

Found it........bad wire in festoon cable. I ran a jumper from J3 to J2 for X26 and the problem disappeared. I was watching X26 and Y40 and 41 and X26 was very inconsistent during wash.

Yep, thats possible.....I do have another site where you have to re-seat the amp to get it to fly right. Thank you

Ever seen a LW4000 go long intermittently on small cars? It has a new mid limit prox.....T-Bar eyes are coming on Y40 and 41 as it passes the mid flag. As previously mentioned.....only on small cars, intermittently.

Use a bigger injector