Search results

Darin is correct, but an area you need to be careful of is if the installer did not use track feet to raise the track off the concrete , you need to make sure your risers are not digging into concrete. Adding washers will cause undue pressure on feet and crack right by weld.

Great Reply, Education is a great tool. Love the information 1) Provides $3.00 or $4.00 express wash an online product to increase average sales. 2) Provides protection with better finish qualities than drying agent because it contains little bit of wax or wax-like substance. Get...

Ok this happens in our sunshine state a lot. The cause of it is the clear coat on the vehicle has lost its ability to protect the vehicle. It normally occurs with a white vehicle. The sun does eventually take care of this, but you can expedite the oxidation of the color with a High pH presoak in...

Disney Swan resort, July 14th-16th

Used friction machine Pm me and I might have some options for you.

This has been confirmed, and they work fine without the clutches

Ryko doesn't put clutches on new SGXS, and the retro kits do not use clutches, so straight shaft with hubs might be the way to go. I have a few sgxs with out the clutches and it works just fine

I do not know your chemical situation, but have seen if your lubrication detergent is high ph cars won't dry as well. There are so many factors to getting a good dry but an idea you could try is us a low ph for your detergent, making sure it has good lubricity. Would like to help you but would...

Have you changed chemicals lately?

Ryko SGXS Hey petite moose, If you need help on Ryko's , please let me know. you did work for my former company in tampa area on a tunnel with a hydraulic leak. Take care

maybe check the arm prox's and also the top brush up prox. If the top brush prox flickers it can cause this. Just a thought

If you are conidering Pdq you must also consider the Wash World Machine.... Autec is very reliable and will last for years too.... We have both machines and like them both very much...... Your distributor is really the key. IMO if you do the work yourself Autec is the simplest to fix and take...

Istobal cleans really well if set up correctly..The program library is extensive but there are cases you have to have a program written. Besides the programming, Istobal has a good machine that runs pretty good.The M-9 is pretty easy to maintain .I know of a few operators you can speak too about...

Mrgte, I have installed many types of machines in my 17 years in the industry, have pros/cons right or wrong about all. The installation is the most important part to a successful ownership to any machine and the cost of ownership. The next most important part of ownership is your maintenance...

Istobal M-9 I believe there are to many salesman on here. If you want eo here from someone who has installed around 15 of them. Please email me your number and I will give you the pros and cons of the machine . Thank you

Have you thought of just putting a IBA? Instead of the tunnel