What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. K

    G5 will not reach 600 PSI on 3X foam

    Thanks so much for the response but everything from the pump stand to the bay has been replaced. Have tried a new VF drive thinking that was the issue but that was not it. The pump is running at 14 HZ like it should. Have pulled all hoses off of the manifold as the 3X is running with nothing...
  2. K

    G5 will not reach 600 PSI on 3X foam

    On a PDQ G5 that is the running pressure for 3X foam
  3. K

    LW 4000 Entry Door Issue

    The eyes should be hooked thru an infrared relay on the wall if you follow the lines. Is the relay lighting? could be a bad relay or bad base
  4. K

    G5 will not reach 600 PSI on 3X foam

    We have a PDQ G5 that will not reach 600 PSI to draw the chemical on all three colors. Have tried another VF drive so that is not the issue. Any ideas? Soap is fine at 800 PSI and the HP is running at 1100 PSI. Took the hoses off out at the bay and still get only 300 off of the pump stand
Back
Top