Search results

Hello I have 3 flojets fail with air leaking from the exhaust valve one being almost 1 year old , i do have air dryer for the compressed air so the air is mositure free, what could be causing this issue on the flojets failing and should i buy new flojets or repair kits if so what kit should i...

Am in the process of upgrading my Washworld High Velocity and looking at option for the upgrade between the Washword Razor Edge and Petit Wash Accutrac-i , can you please chime in the expreiences you have had with this machines pros and cons,

i would like to get the opinion on carwash owners that have a Clam Style Pit cleaner or Vacuum style the pro and cons of each one .

this morning i found one of the bay had shut down now power to it, i found that one on the sami fuse was lighted up , i turn of power to the bay change the fuse and replace the sami fuse cap back, now the bay is on but on high pressure function the 3 phase motor is humming keep humming where and...

I have 2 hydrominders that are doing the same thing, there is a back flow of water into the chemical drums, thru the chemical feed pipe, i have no idea why there is a backflow could this be a bad foot valve or something in the hydrominder that is causing the backflow.

i installed new self serve doors with mars bill acceptors just a few month ago , now i have two of them acting weird it would take the bill half way in and spite it out , i have tried cleaning them but still to no vain it will not accept any bill , i could not find a troubleshooting manual for...

has anyone tried to consolidate their cryptopay credit card billing, i am having difficult times trying to find out why i am losing my sleep , the reports from the cryptopay website for the month are higher then the first data credit card report which includes all the fees . for example in...

i have a Washworld high velocity as at current i am using all chemicals from National automotive they have done an ok job but i want a wonderful job done as for the chemicals working to clean the car, can any tell what chemicals they are using with best results on this machine for 2 step presoak...

3 months ago i upgrade my self serve wash with new ginsan doors, i am having an issue with a one self serve door where after 2 weeks the circuit controller board on the door world blow up it has blown up 3 circuit boards up to now, the timer , credit card acceptor and the coin acceptor dont...

on my acw4/5 I have one of the medeco lock that would not turn with the key anymore , does anyone have an idea how to get this the lock out please PM me.

I am changing my coin acceptors from IDX X-10 to Microcoin QL on my vac with Dixmor LED 6 timers. I wired the black wire to 24v , the yellow and blue to Neutral (common) and the Green wire to coin timer pulse. the issue is the coin acceptor accepts the coin but never passes the pulse to the...

i recently changed the timer on my jim coleman combo vacs to dixmor 6s but I have an issue in the past the customer could only select either vacuum or fragrance but after the timer change they are able to switch back and forth from vacuum to fragrance is time is remaining . did I miss some...

I am trying to upgrade my coin acceptor on my jim coleman combo vacs to the new microcoin ql but I ran into a problem the coin slot is cut out to only accept quarters nothing bigger like the tokens nor dollar coins can go thru , looking for ideas on how to widen the coin slot to accept tokens...

i just purchased some air shammee air dyers for my Self serve wash , debating on mounting inside the bay or on the roof , I am leaning towards mounting on the roof which would reduce the noise in the bay, but my roof canopy is open on the top so worried about rain , weather doing the damage...

from reading the forum a lot people are using a 3/8 high pressure hose from the pump to the boom but my question what type and make is better 1 steel wire braid or 2 steel wire braid and what brand ?

i am currently under the process of remodeling my carwash and was looking for input on some ceiling booms ,I would like to replace my current Kleen Rite Spring Boom - Stainless Steel X-Brace with mosmatic Z style booms. but my concern with mosmatic boom there is no spring to relieve the tension...

I am currently under the process of upgrading my 8 position rotary coin boxes to 12 function push buttons, I want to get some input on what menu functions are run for 12 function door, so far this is what I have come too. 1- Stop 2- Wheel tire / Engine Cleaner 3- Bug Off 4- Presoak 5- High...

Anyone have one of this Turbo Vacs with 3 motors, I am deciding to put some in and would like some feedback 1. how are they compared to 2 motor vacs 2. what do you charge for a Turbo vac compared to a 2 motor vac 3. read on the forum that some have used the Domel motors from windtax for more...

Hello Anyone have any feedback on ginsan Selfserve equipment the pros and cons of their ultimate and ultra systems, I am considering in the market of buying a new equipment . looking to sell my 6 Bay Jim Coleman unit too if anyone is interested.

I am in the planning stages of giving Free vac with every wash at my Inbay automatic , to accomplish this I will dispense token using token dispenser from Carolina pride and use a IDX X-10 multicoin acceptor on my Vacs to accept both coins and tokens ,plus they could use the token in my self...