Search results

This will take some time but is effective at night or slow time when nobody is using the wash, drain your entire presoak tank go to each individual bay and click to high pressure rinse squeezing the HP gun and water should come back into the tank depending on which bay is being used will...

Kim thank you for the update and detailed review happy for you!

why not switch the timer from another bay and see if problem follows takes 2mins to swap

Ginsan/Sensortron hands down for quarters only! I have ran both over the years.

You my friend are considered a Operator there is a Major difference. Many people own washes & collect quarters but few are Operators!

Greg is correct take apart your liquid solenoids I promise you they need rebuilding or replacing as well as the regulator. Make sure the hydro minder is sucking product correctly and if you don't listen to anything on here that's been mentioned several times in the thread already TRASH the...

Its a four-wheeler with a huge lift kit and tires looks clean. The people that do this stuff all I want to know is how do they stand the strong HI ph and booster if its as strong as some people run it burning there eyes and face.

I would drain your holding tank also completely empty. One more thing to look for is when the Hydrominder reaches the desired level that its actually cutting off and not bleeding a small stream of water into the tank through the discharge hose that will water down product tremendously.

I would suggest a little lower and about 2-3+ feet inwards, right now they are on the edge of the bay that has a alot to do with the shadowing. I would defiantly try that.

I got a Carolina pride triple foam system I removed all the Siemens controls out and have a ginsan GS-30 controller works flawless for years

I have been working emailing and communicating with Doug Empie since Christmas on a Order one of the few people in this Industry that's nice and easy to work with.

What brand of Automatics do you currently have and what kind of pay stations also?

yes sir hope that helps. I would verify your incoming power to make sure its steady 115/120V there finicky to power also i seen over the years.

Absolutely your timer I bet. Those are not reliable same as the IDX flatpack. When we switched to dixmor digital timers and Microcoin acceptors those problems went away.

Etowah Valley does make this bracket indeed

Be careful not to drop the Allen screw when you remove these to drain and add oil very easy to do.

4300 a month for a lease that's nothing to sneeze at. For a straight self serve wash it better do some big number. I would RUN not walk RUN and count my blessings.

its going to be 3 plugs on all the gearboxes one will be halfway and the other will be on top of the gearbox where you add it in and actually a plug on the bottom as well for draining. All laserwash 4000s and high velocity's have this. I always bought the oil from a PDQ distributor or washworld...

One of the Big Negatives for me was Nayax vs cryptopay. Cryptopay has Wi-Fi since most washes now have high speed internet for IP remote viewing of cameras already on site and alot of pay stations have dedicated IP addresses and high speed requirements also. Why pay twice. Nayax needs to figure...

Blue Corral Blendco Quest Warsaw CSI Armorall/ZEP Transchem Qual Chem Any of this will mop the floor on kleenrite and wall Mart dollar General soaps. If I ran that where I live I couldn't get any customers bc there are good operators that run good self serve washes where I live and would...