Search results

I have a couple of shurvends at my washes that have worked great. I need a new one for new location and unfortunately Shurvend is no longer so what vendor do you recommend? Thank you, Kirb

I have a 1 1/2 year old Goldline Plus with Mars all of a sudden not giving credit all the time. Originally when I put this into service it would steal $10 bills every once in a while. They upgraded the software and fixed it. Now its happening again with all bills. I have made sure all plugs...

Having issues with a 500 btu floor heat boiler. This is the first time I am firing the boiler at a new to me location. I cleaned boiler and everything seems to be working fine except it runs for 5 minutes shuts off then re fires 30 seconds later. I think it's the hot water stat out of the...

Is anyone having problems with Etowah Valley and Bluepay? For the last two days I see Approved Auth coming through but it hasn’t capture or batch. Anyone else?

I need to order new RO Membranes and I was wondering the difference in them. I can order a 4"X40 from 2,200 gallons to 3,200 gallons per day. My thought is go with the 3,200 and get the most gallons per day. Is my thinking correct or is there water quality not as good with the higher GPD...

I have an ER-60 with a Mars validator thats having some issues. Its worked great for 5 years just cleaning it monthly. Now it will work fine then every so often it takes the bill and gives no credit. When it happened I put the same bill in and it took it real slowly then stopped. It happened...

I am on the fence with a 2 and 3 I am rehabbing. It is going to have new meter boxes and using current Hamilton pay station that has dial up. Not sure if I should go with Hamilton DAN with DTI in SS bays, CryptoPay in SS and dial up on pay station, or CryptoPay in SS bays and pay station...

Below is the link to report on Cleveland stringing " simple technique used to net hundreds" http://fox8.com/2013/06/25/simple-technique-used-to-net-hundreds/

I am sick of sorting mixed bills. Which Bill Discriminators do you have? I know they aren't cheap so I want to get one that will last. Where is the best place to buy them? Thanks, Kirb

I have a general emperor htck 4050s that I have a major problem with. Two weeks ago oil started pouring out the bottom of my pump. I was at the wash so I pulled the breakers before the pump burned up. Called general and replaced the pump oil seals. No problems till this morning when I got to...

How often do you chance your oil in IBA, SS, and compressor pumps? How high in the sight window should the oil be? I have been keeping it just above the dot so about 5/8 to 3/4 of window is filled, but not sure if this is to high and could cause possible damage. Thanks, Kirb

I have two of my IDX coin acceptors that keep jamming. I have a dozen IDX X-10 for 2 1/2 years with only a handful of jams. Now in the last couple of weeks I have had 10 jams in two of the acceptors. I have cleaned them with alcohol and it hasn’t resolved the issue. What else can I try...

I need to add a RO membrane to my current system and need to know how to plumb it. I currently have a single 2800gpd membrane that works great, just not enough production. The pump is big enough to handle the extra membrane. What’s the best way to plumb it? Thank you, Kirb

How many courses of block should there be to the bottom of the pay station? Thanks, Kirb

I am in the market for FRP and I found that I can get a smooth finish also. Does anyone have experience with smooth FRP? What thickness? Thanks, Kirb

What is the best man door for an IBA that will last? Thanks, Kirb

I have tried to get my five 26-year old palomas working. I am giving up fixing them because I spent too much time/$$$ and who knows what else is wrong with them. I know there are more efficient ways now to heat the water. Should I replace with Palomas 1 for each bay or link them together...

I need a heater for my pump room. Which type works the best and most efficient for the room radiant vent-free natural gas, a blue flame vent-free natural gas or electric? Thanks in advance, Kirb

I have 5 Paloma PH24 that flow is very restricted. The previous owner stopped using hot water wash because the Palomas kept clogging with calcium. Since then have put a water softener in and want to get them working again. I did clean water filter on the inlet side. Any suggestion on how to...

My Mars 2400 Series bill Validator will accept the bill then reject it. The lights on the front blink like the status is good but still will reject the bill. I shut off the breaker to reset the validator and it works fine for multiple bills. I come back the next day and it doesn't work again...