Search results

  1. G

    Questions about slab heat

    Just stopped at one of our sites and took a look at a smaller Raypack 263k FH boiler. It only has one gas valve and the modulation numbers are way different than our larger boilers so you need the card for your particular gas valve. This is set at 2 which sets it 135F. The automatic high limit...
  2. G

    Questions about slab heat

    We've run Raypack FH boilers since 1984 and unless my old memory is failing me, this is the first time I've ever heard of a "low limit" needing to be satisifed to continue to operate? My understanding is that there are two high limits....an automatic high limit and a secondary high limit that...
  3. G

    New Petit install & having HELL!! Need some help

    It's been a while since I wired cryptopay into an ACW4 so I don't remember what wires are tied into what. I will tell you that the swiper should be disabled once that second wash is paid for and stacked. You should test a couple of things.... Flip your passive/active toggle switch to...
  4. G

    New Petit install & having HELL!! Need some help

    Swapping in a brand new Inhibit relay is certainly a good idea. I've had plenty of relays where the internal solder joints come loose and become intermittent. Also, back when I was chasing my tail years ago on this issue, lots of people suggested swapping or replacing the relay pan in the ACW...
  5. G

    New Petit install & having HELL!! Need some help

    Hold on a minute. Something else is wrong or something is not wired properly. The ACW4 is pretty simply. It is only capable of stacking and holding one wash. How are multiple people losing money? There are basically three states the ACW has: 1) Waiting to take payment. When it does it will...
  6. G

    New Petit install & having HELL!! Need some help

    We have several ACW4/5’s and have had the same issue over the years. I personally think there is some type of glitch with the controllers as they have been hooked up to various automatic types and they all exhibited the same problem occasionally. The problem is that the ACW missed, for whatever...
  7. G

    Discontinued Tokens

    We used to tumble our CTX tokens in a mini cement mixer with rice. Now we don’t worry about it. They’re just a dirty dingier gold that doesn’t shine and we’re fine with that. I just wanted to see that the Salmon tokens simply become dull like I would expect and not some nasty looking coin.
  8. G

    Discontinued Tokens

    Is anyone using Van Brooks/Osbornes ‘Time Saver’ salmon colored token? If so, can you post a picture of a used/older one? I’m just curious what these will look like after sitting in a damp vac safe for a month.
  9. G

    Discontinued Tokens

    Well now I’m pissed. Why didn’t they offer me another CTX model? They sent me three samples of different coins that were different sizes and different colors. The only one that was 1.073” was a salmon color, not gold like my current token.
  10. G

    Washworld Razor

    Wow, they raised that a lot! I don't think my Razor has much impact as it is, I can't imagine adding 2 or 3 more nozzles.
  11. G

    Discontinued Tokens

    I didn't even think about the time involved in reprogramming all the multi-coin acceptors we have, I was more focused on all of the Slugbusters we'll have to replace. Between our 5 self-serves we have 38 Slugbusters and 50+ multi-coins. We also typically have close to 40,000 tokens on hand not...
  12. G

    Discontinued Tokens

    No. I don’t know if they killed the entire CTX line or just certain ones.
  13. G

    Discontinued Tokens

    Just a heads up to anyone using Tokens from Osborne/Tokens Direct/Van Brook. I went to re-order more of our custom token last week only to find out that it has been discontinued. Apparently they simply cannot get some of the metal needed to make our control token. We were using their CTX-812...
  14. G

    Current Petit Owners/Operators

    I also am not following your math. How did you arrive at this number? If you have a dual bay and you ran two HP passes per wash you still wouldn’t approach that volume. The high pressure pass is about 30 seconds, less for the top spray…so call it a minute total that HP pumps are running…that’s...
  15. G

    Current Petit Owners/Operators

    In case you're curious, I just measured and figured the volume of the holding tank on the Petit. The tank has about 35 gallons of usuable capacity. Our 'all in' average water consumption is about 56 gallons per car.
  16. G

    SecureCoin Model CP990U Coin Acceptor Issue

    The new acceptors I purchased a month or so ago had a real nice instruction booklet tucked in the bottom of the box. The overall operation of these units is the same as in the past with the exception of a ‘Power Saving’ mode at which time the LEDs will flash. Problem solved!
  17. G

    SecureCoin Model CP990U Coin Acceptor Issue

    The Secure Coin acceptors seem to have gone through several iterations over the years. Originally they were blue plastic junk, then they became iCoin on metal frames, and now they're back to SecureCoin with what looks to be much better red plastic bodies. The electronics I believe have...
  18. G

    Current Petit Owners/Operators

    The Kerrick floats that were in our first two Petits were garbage. The seals on the plungers had what looked like defects from the mold and would seep. They didn't last long. After replacing several times our distributor gave us a Walters valve that lasted about a week. I ended up installing...
  19. G

    PreSoak streaking

    Soonermajic, what is your air pressure set at? We run 4WD Hi boosted with Triad-Hi as our second step and its plenty clingy. Any chance you're running it through your triple foam pods for the second pass? If so, maybe that needs adjusted. Try running it through the arms instead of the pods...
  20. G

    Current Petit Owners/Operators

    A 2” line should flow over 100gpm. The two pumps run for about 30 seconds, so between the two pumps you’re talking about 35 gallons and between the two bays you’re talking about 70 gallons. The fill valves are high flow also. Also off the top of my head we’re using around 50 gallons total per...
Top