Search results

  1. T

    Employee giving time on Meters??????

    Hello guys I have seen other people struggle with this issue across the industry and I may or may not have this problem but deep down inside I think he is giving time away to freinds, family, hot girls ECT and getting reimbursed for it on my dime... I have told my clean up guy if he is caught he...
  2. T

    Have you ever ran away business

    I have been renovating a wash all summer a 4 bay SS and the place is $1.25 for 3mins currently 8 positions the basics. We added all new fragrance & turbo vacs $1.25 & $1.50 now for them. I am about to add new meters, bill acceptors, & 2 bays with air shamees, Tri colored foam in all bays and...
  3. T

    Bonus time LED7

    Merry Xmas guys! I was trying to learn more about bonus time from different operators that have & use it. I was trying to help a guy set this up. Do you use the single bonus or double bonus In the programming setup. I want to give bonus time on $5 bills & $10 bills only when inserted into...
  4. T

    VAC IT UP SYSTEM Questions

    Hello guys i have a little 4 bay i am helping with and renovating and its in the middle of a neighborhood area in close quarters homes surrounding it and sometimes its several people sitting on there porch or walking when i pull the quarters out of the bay safes and i do not like the idea wash...
  5. T

    Incoming Power to my Carwash

    I got a odd question for you guys. I have 3 phase service and currently getting 211 volts to all my equipment and electrical panels from the street. I did amp draws on all my motors and there a little high amperage and there’s no telling how many years this has been like this. All my motors are...
  6. T

    Hiring Help for SS Tips

    Hey guys I want to talk about a subject I never see on the form. I fired my helper last night clean up guy for good, and want to get a first class clean up attendant and wanted to hear others tips on the hiring process. My guy worked with me for 7 years or more every day, he got way to...
  7. T

    Laser 4000 entrance timeout

    Hey guys hope everyone has a good Thanksgiving. The past week or more my Laser 4000 keeps paging me a entrance trouble timeout code and resets code 55 about 1-2x's a day and I have increased the time to 600 seconds in the parameters from 400 seconds and was wondering what else to look for...
  8. T

    PRV valve for main water

    Hey guys I have a little situation and have been doing some plumbing work in my self serve equipment room lately new water heater etc.. I noticed my pressure has been kinda high so I look at my gauge on the exit side of my pressure reducing valve and it like 90 psi so I replaced the gauge and...
  9. T

    Ghetto Wash experience?

    Hey guys I was seeing if anyone on here has experience or running a SS ghetto wash meaning in the hood or rough location. I have a customer I do service calls on 6-7xs a year and it's a four bay SS in a rough location with good road traffic and lots & lots of houses in sight and per square mile...
  10. T

    WashWorld Troubleshooting Videos YouTube

    Hey Guys This month I don't know if I am the only person that has noticed but on YouTube WashWorld/Channel last Week they have posted several basic informative Videos on Diagnosing and Troubleshooting the WashWorld Razor. I thought was pretty Cool especially to new operators. I wonder if the...
  11. T

    Weep Saving Tips Help

    Hey guys at my 10 Bay SS+1 carwash that i have, I was wondering if anyone is doing anything else besides a weepmizer on the HP wands not brush to save on the water bill. I installed a weepmizer about 7 years ago and its helped but I have to turn the water/weep wide open on the 10-12 degree...
  12. T

    ICA Show 2016 Nashville

    Hey Guys. I heard that the ICA show in 2016 will be in Nashville TN next year. What you guys think about that instead of Vegas for a change and will be in the south for the first time in over 20 years. I am defiantly going since i didn't go this year from what I heard did not miss much. This...
  13. T

    RO recovery Tank ideas for laser

    Hey guys I have a laser 4000 and have a water softener and spot free machine that dumps a lot of water down the drain every so often. My local Distributor guy want 3k to install. How could I do this myself, my equipment room is big enough. He was saying install a 300 gallon poly tank a 1.5hp...
  14. T

    Laser aftermarket Sign help

    On my Laser 4000 I am trying to install a Rain X LED sign by itself.That only suppose to light up on the Top wash only. When the Y26 relay comes on. I want the sign to come and the Y26 relay is 24V and my sign is 120V so I tried to install a Contactor with 24V coil and 120 contacts. I wish i...
  15. T

    Hamilton Mini Bill to Bill Changer

    Hey guys I have a really big issue of customers worrying me to death at my carwash wanting change for a $20 bill like 10 people a day sometimes more and its a real nuisance when your working climb down a ladder just stop whatever your working on. I was wondering if anybody has the Mini Bill to...
  16. T

    Danfoss Valves for Laser common problem

    Hey guys I was wondering is there other people on this form that has problems with the Laser 4000 Danfoss valves going bad every 6 months it seems I have talked to other local operators where I live and they experience the same issue. I see that PDQ had the stainless upgrade kit for these and...
  17. T

    Hypro 2535S Reveiw

    I was wondering if anyone on here has a Hypro 2535S pump and do you like it or not and why? I see they have a all stainless manifold and seem simple design like cat and a 5 year warranty which nobody else has. Just wondering if anyone has one of these and like it are they quiet and smooth...
  18. T

    PDQ guys spot free Pump on the Laser 4000

    hey guys on my Laser 4000 the spot free delivery pump is bad and I want a stay rite pump but I have a old Dayton and it doesn't give the GPM or the PSI does anyone on here know that for the 4000. Its single phase 208 volts 1HP and 1PH is all i know. I went to Kleen rite and they only have two...
  19. T

    Quest chemicals / Happy New Year to everyone!

    has anybody on here tried Quest chemicals I just got them in the SS but would like to try it on my laser 4000 and if you do whats your set up and do you like it? They offer alot more products than most big name manufactures at small guy price. Thanks guys hope everyone has a Happy new Year.
  20. T

    Reveiws on Turtle Wax Pro chemicals anyone???

    Hello Guys I am a fan of Armor All Professional chemicals presoaks on my touchless automatic/Laser and has always been good to me HOWEVER my distributor lost his rights to sell the product typical carwash politics and crooks same story ect ect... and I am highly interested in TurtleWaxPro and...
Top