Search results

I'm rewiring some meter boxes and was wondering what is the correct size (width) spade connector for an electroswitch? The ones at the local box store were too wide. I probably need to order them. Any preferred brand or part number? Will be using 18 gauge stranded wire.

Perhaps I'm missing something here. What would be the drawback of installing the Crytopay swiper with the button on the vacuum? What is the advantage of installing the swiper without the button on the vacuum?

I have small coin boxes that measure 6 inches wide by 11 inches tall. To accommodate the Crytopay card reader, I was planning on mounting the display timer on the wall above the meter box and having new faceplates made. The box is recessed into the wall approximately 3 inches. What would be...

What internet service speed would be best so that I could monitor my car wash remotely. Is cable any better than DSL? Anything I need to look out for? Thanks

I have the option to mount cameras on my light poles or in each bay. From experience, would it better to mount the cameras on the perimeter light poles on in the bays? One of my concerns about mounting cameras in the bays is that the lens will frequently need cleaning. Additionally, if I do...

Did you buy the optional junction box from lorex and mount that to the pole first? The reason I'm asking is that the wires will be external to the pole and I will use a guy wire to support them to the building.

I thought about doing that but the camera base is 4.8 inches wide and the square mounting pole width is 4 inches. Any creative ideas?

Getting ready to install some Lorex LNE8974 series dome cameras on a 4 inch pole. Was looking on the Lorex website and cannot find a goose-neck style mount. The idea is to avoid mounting the camera directly to the pole. looking for some type of mount that lets me mount the camera horizontally...

Getting ready to install a new video system and have a question about PoE cable. The system I'm considering comes with premade 100ft cat5e cables but they are not outdoor/direct burial rated. Do I need direct burial rated cables if they are under a canopy? If needed I could purchase some cat5e...

Randy, Would you mind sending this to me too? Thanks.

I have an RNS and cannot find the installation instructions on the EV website. Does the kit use the same hole as the hamilton validator? is the kit an up or down stack validator? Is any cutting of the faceplate required? If somebody could post an installation pdf or pics it would be great.

I just got a used Hamilton RNS change machine. There are no keys so I'm still unable to completely know what I'm working with. It seems to have A Coinco conversion kit already installed and I was thinking of converting it to MARS. I believe that both Etowah Valley Equipment and Hamilton make...

Thanks

Have two Medico plug locks that need removing (lost keys). Spent inordinate amount of time getting the first one out. Can somebody please send me the instructions to remove these? Thanks

How can the high pressure pump and Air Shammee use the same contactor?

Is your router/modem password protected? How about the neighboring business?

Looking to mount a light pole next to each vacuum island. Trying to get an idea of what is considered sufficient light in terms of foot-candles. I don't think the lighting standards for parking areas may be adequate for customers vacuuming at night. Any recommendations on pole height and target...

I know this has been discussed before, but I'm considering replacing our current change machine due to age and reliability issues. Considering either a Rowe 2800 with mars or Hamilton DRS with Mars. I have an opportunity to purchase a refurbished Rowe 2800 with new mars upgrade or spend more...

Thanks for the responses. First off, Unitec reached out to me regarding this issue. It seams that the J2 connector on the controller board can become dirty and interfere with the data communication between the controller board and the validator. So we will attempt to clean and align the...

I have two Unitec WashChanges (change machine) that were upgraded to a Mars validator (AE 2602) years ago. Periodically, the machine will go out of service and the red light on the back of the validator will flash twice indicating the validator has been disabled. To clear the code and get the...