Search results

First, I would test the cable to the motor with a Megger and visually check wiring in the electronic cabinet (mice love german wiring). If you are pretty sure that happens only when switching from presoak to HP rinse, check the low pressure pump for moisture inside the junction box, grease the...

Probably it won't do it again aftet adjusting the yellow top wheel, but be prepared to replace it in the next 3 months, eventually will worn out.

I guess He was just trying to get the knowledge of the magic button that will fix everything and save him a service call.

Yeah these days is all about money, hurry up, if it holds for a month leave it like that.

I agree that not all brands are the same and will mostly depend of your distributor/servicer efficiency. If you have a long bay, there is not need to restrict it to a touch-less only. A Mark VII choice wash could be a good option (once Mark VII figure out why their heater tank keeps tripping)...

Ha ha ha, that is the story of my life, during the last 10years. My boss sending me to fix always something I've never seen, then asking me to check on youtube.

If wheel brush not reading properly rear wheel, raise sensors all the way up in their brackets. If loosing pulse count when driving (exit travel actuaded unexpectedly or NOT on) check: 1. Exit and pulsar sensors. 2. Track deformations, bumps. 3. Rear idle wheels may worn out, reading different...

Most of my voltage issues with the GT700 were the Hubscrub sensors. Does it happens with all wash packages? How frequently?

I believe you can call DRB for tech support as a owner, there is a serial number inside the unit on the wall that you have to give it to them. If there are LEDs ON on the front, probably you have to check if you have internet to the router or swith inside the unit, also make sure your printer...

Hi, We are trying to fix an old motor for a vinyl door that will receive the voltage on the Bd but nothing comes out, when opened showed signs of water damaged. Looks like an old Airlift Motor with the circuit bd in front. Does anyone has any PN or more info about this Bd? Thanks for any help.

Looks like you are working on a GT300 or GT500?. I would ran your presoak line directly to the side manifold only (no Y for the hubscrub). Purge the presoak with the chemical line disconnected on the T that mixes with water, leave the check valve connected on the T, and make sure that check...

Let me know if you still needed, I may be able to get one of those.

I have been a carwash tech for the last 10yrs, mostly serviced Mark VII, but also some PDQs and Ryko. You guys are pretty much correct about the confusion that generates on customers who prefer a touchfree a ChoiceWash with brushes. But, also I have noticed that it depends of the type of...

For the Telemecanique like XS618B1NAM12 (treadle sensors) you can use the 6YB38 or E18018, Grainger sells those ones, but probably you'll get them cheaper on Ebay.

It depends, if you know the part number or the specifications you can get them on Ebay or a replacement online. What kind of parts are you looking for?

After the boom goes down at the front of the car, does it make the tilt towards the car? Then, when the boom goes up and the Gantry goes to the back, is the Stop light flashing or steady? If is flashing, at the end of the wash the CMI will show an error code, what was that code? It could be...

Never saw that system before but almost all door systems has the same principle. 1. If your doors are close and somebody punch a wash code and the entrance door opens, that means your CW system door controller is sending the signal to the entrance door. Now, if it doesn't close by itself but it...

How is the plumbing on your Cat Pump? Check the outlet, if you have a recirculating adjustable valve that takes the extra pressure back to the cat pump may be broken. Can you post some pics to see how is the outlet line at the Cat Pump? If that happens with the UCW and the machine, seems to be a...

Great! But for $299 now in Home Depot you can get a Qsee 8 channel 1TB Hard Drive HDMI port and 4 Cams 700TVL, and the very best tech support from QSee. Only problem is that even with a 700TLV you won't be able to see a nice face o tag number unless is in straight line within 20Ft, and that's...

Which one?? The straight or angled one. We got a angled one in stock, let me know where are you located so We can send you an estimate.