Search results

Looks like a former Super Wash.

I'll get some pictures ASAP. The unit is dated 2003. It has "Mega-Vac IVS" decals on the tank. The decals (I think) are original. The plexiglass has been replaced with a Fragramatics "Select-a-Vac" window. The front door is One piece. The coin mech is a Sensotron. The display is an IDX...

That's actually a good idea. The device across the inputs HAS to be some kind of suppression device. Those vac motors are electrically noisy. Switching from 2 to 3 motors would involve some "noise" during the startup....which could, in turn, cause the inputs to sense the noise instead of...

I have a 20 year old Industrial Vac Systems "Select-A_Vac". It allows the customer to select either a 2 or 3 motor suction. The unit still works fine. However, the contact blocks and Solid State relays are badly corroded. It's impossible to even turn the screws on the contacts. I'm going to...

The black, coin return (Half moon shaped) cups on my Sensotron coin acceptors need replacing. Kleen-rite shows two different cups. CB0221 and CB0222. Does anyone know the difference between these two parts and/or which one would work with my acceptors?

Yes. It's worked very well for me in my Applied Membranes system. Again, I'm NOT associated with the eBay seller in any way, except that I've been very pleased with the price and performance of this membrane.

It was suggested to me, to consider adding a note (to the decal) that says, "STOP, does not stop the charges".

I've purchased XLE (Extra Low Energy) 4040 Membranes from Coastal Water Filters on eBay with good success. I run them between 80-100psi (depends on time of year). Right now, they're about $175. I have ZERO affiliation with them. I'm just a satisfied customer.

Did you use "Pause", or "OFF"?

I'm not sure I'm reading this thread correctly. You want to do a chlorine test AFTER the carbon filter, and before entering the RO system. Chlorine murders the membranes. At our wash, we do a chlorine test (a swimming pool test kit works for us) monthly. We have great incoming water, and I...

I'm having new decals made for my self serve bays. Has anyone replaced the "stop" with something else? When credit card customers "stop", they mistakenly think that the rotary switch stops the CC charges, instead of using the stop button on the CC swiper. What about replacing "stop" with the...

I need a good recommendation for custom meter box decals. I remember reading something recently (on the forum), but I can't find the link.

The cost of water, and more so, the sewer....is very high in my location. At some point, it's cheaper to accept the lower life of the membranes in exchange for lower operating costs. The question, is where to draw that line. Yes, the quality of the water here is excellent. The feedwater has...

I still a little confused. Is it best to run a 1:1 product:reject rate (50% recovery), or is it OK to turn up the recirculation and have a 75% (or higher) recovery rate?

I have a 8GPM Procon run by a 1.5 HP Baldor motor in my 2 Membrane setup.

This thread has got me thinking. I wonder if I've been running my unit at less than an "efficient" mode. I had a 1 membrane Applied Membranes unit that was expanded to 2 membranes decades ago (when I added an additional automatic bay). The motor/pump was also up-sized. I've been running the...

I used an aftermarket display similar to this: AMS Sensit 2 or 3 LED Display Board – Aftermarket | Snack Attack Vending LLC Vending Machine Service (snackattacknow.com) I believe it's a Winstar EH 1602A. Double check. I found this in my files: 16x2 Dot Matrix Characters VFD Display...

Do you know if your former Super Wash was once owned by a USAir Pilot?

1 Micron Sediment Filter, 2.5 in. Diameter | 200625 (kleen-ritecorp.com) I can't remember if you need a 5 or 1 micron....????? BTW, when you remove that large snap ring, but sure to keep it covered with a shop rag or similar. That thing can really fly and hurt you if you aren't careful. It...

Here's what you likely need. DAYTON, 1 in, Valve Rebuild Kit - 2DAD2|066047 - Grainger Shop around. Prices are all over the place.....