Search results

Do you know anyone with a Flir infrared camera? They work great for diagnosing floor leaks for about $320

my Gerber multi tool that I always have in my pocket. I burned the tip off of the screwdriver when I shorted it out on a live wire. I do love by Wiha electrician screwdrivers but sometimes they aren’t handy and I need a shocking reminder why I own them.

I’m close to going down this path myself. I know that several of my friends buy their insurance as part of a group through the local Chamber of Commerce. Of course, that also requires you to be a member of your local Chamber of Commerce. For me there doesn’t seem to be much benefit unless...

You’ll have more fun putting this video on the local Facebook page. Not only will everyone know this guy is a jackass but all of the Jackasses I town will know you have a great video system

I just drilled some holes with the hammer drill, pounded in some rebar, and used a new section of pipe I had laying around. When the concrete cured it was as solid as the original bollard. I covered it with a plastic bollard cover. No one will ever know!

Weird, my remote doesn’t work though the glass on my GMC. Assumed the polarized glass effected the signal.

I’d switch to the Air-Logic nozzle and holder.

Which nozzle and holder do you currently have? Regarding the delay relay, Yes you can add a 24vac delay timer to the control wire that activates the contactor for the blower motors. I buy them from the local plumbing supply house in the HVAC section.

I have the Lorex system and one Hikvision system that my security company installed. The Hiksystem was more expensive but doesn’t have any more features that would justify the added cost except for a huge hard drive that records 14 cameras for about 30 days. My neighbor has a WatchDog system...

Scott Downey, I can relate…but the way, nothing wrong with either of these machines. Operator error both times. One guy didn’t put the startup amount in the bay. The change machine guy was counting dollar coins as quarters

I remember using a chart from CAT when I was changing for 310 to 530 pumps on my existing 5hp motors. I think the concern here is more about water volume than pressure. You certainly don’t want to starve the pump of water volume but too much volume isn’t good either. You need to pick your...

“Do you have a mouse in your pocket?”

does this count? Probably not my worst customer in the past 23 years but definitely the worst customer this past Saturday

Make sure all of your motors/pumps are still turning in the correct rotation. next get a clamp on amp meter and check the amps on each wire. Set the overload relay to just above the highest amp reading. It’s possible but unlikely that the flex wand is causing your issue but I won’t say it’s...

Does anyone have a contact at TSYS to set up a new account? We’re selling a location and need to switch Etowah Valley QuickPay timer to the new owner

What login portal is everyone using for TSYS? I’m having an issue that I’d prefer not to elaborate on here….

I’m near Waxman. The pollen has gone crazy but the haze seems to be keeping customers away. The combination of smoke and pollen is really affecting my allergies too.

I think MEP might be AI after all of these years. He sounds pretty intelligent. It never occurred to me until now that he probably doesn’t exist. I’ve met most of the veterans here but I don’t recall anyone having met MEP.

I’ve had to hammer the cog gear inward towards the machine and then use a flat chisel to open up the slot in the bushing. I’ve even had to cut the bushing off with a grinder. Whatever you do, don’t hammer on the end of the axle shaft! It will mushroom over and you’ll have to replace it. I keep...

air does come out the brush head but also seems to go back up the chemical line all the way to the gallon jug of shampoo. I installed this machine in 2004. Refurbished it once since then. A few weeks ago the chemical flow got very weak. I started looking into it and thought the pump tube...