Search results

Turns out its not tied to change dispensing. it appears to crash now after triggering a wash relay

Hey, I have a wash select 2 that crashes when it has to give change. If I unplug then replug the hopper cable to the main cup board it will work for a few days then go back to crashing. The harness is new And all the set screws in the green block are good. any ideas what it could be other than...

Take a look at the D&S iQ Max too

Chase will take bags of coins too. < $1000 per bag, you declare the value and they credit your account. Around a week later any adjustments are made to your balance. There's no charge for this

@Greg Pack I have something that im just finishing up for iPhone and Web. I can share it with you

Im not sure if it's just TN but there are so many banks here still not offering tap that we're having to look at Nayax/Monex to process the chip transaction

We just did this. 2 days to get the world pay account and same day transfer once we filled out the buyer / seller forms. Once the forms were emailed we just called from the site to get the transfer done

Does anyone know how to attend the sessions in the mornings?

This is my first ICA show as I've only been in the industry a year. Im excited to see it all

By hand it moves fine. I’m not sure what would cause the air to exhaust rather than actuate.

It’s set to about 50psi right now. Increasing / decreasing doesn’t change anything. I’ve added some 3 in one to try and encourage some movement. used 1.0 might not be a terrible idea. We’re just north of Memphis.

Hey Greg, I’ve replaced the regulators as they were seized. Regardless of pressure the tilt is the same it just varies the amount of air through the exhausts. I’ll look at adjusting the stops in the morning

Hey, We're trying to rehab an (old as time) Water Wizard 1.0, and the boom is only tilting about 20 degrees forward and aft. The air exits the mac valve through the exhausts rather than pivoting the boom. Rather than drop $2500 on a replacement actuator, does anyone have any tips on fixing...

Can you use the swiper and Tap plus together? I like the idea of being able to do service recovery by providing a QR code that can be scanned by the Tap plus unit

Hi. I’ve added Nayax to our wash select 2 but have an odd issue. At least once a day it’s charging the card and sending pulses, but will end up with “add $1 for <wash name>” on the WS2 display. I’ve replaced the cpu board due it crediting a quarter as $1.68 (amongst other issues) and the I/O...

that’s exactly it.. Thank you!

Hey, New to the forum and car wash ownership, so I apologise if this is a stupid question. We have Coleman 23000 coin meters in our SS bays, and one of the displays seem to have lost the will to light up half of itself. Are these displays repairable/replaceable? If so, where would the parts be...