Search results

They were originally Carolina pride boxes if that helps.

I need some new graphics for my meter boxes. Does anyone have any suggestions on where to get them designed and made?

Just to follow up on this, I replaced the foot valve and everything was working fine. Pulled into the wash the next day and it looked like soup again. I replaced the foot valve again and a few parts on the Hydrominder but nothing helped. Finally hooked up a new pale of soap and had shaving cream...

JBS on everything other than tire cleaner.

I also am using the demas and have been for a while. Ironically the bad one was still one of the old blue ones. That thing has been on there for a long while.

The foot valves seems to have been the issue. Thanks guys!

I’m with you now. My apologies. I will check that also.

My hydrominders are suppose to have the built in siphon break on them. I also drilled holes in the delivery tubes going down into the tanks. I’ll hook up a fresh pale of soap and see if it makes a difference.

My foam brush looks like garbage all of a sudden. I’ve tested my water. It’s at 0 hardness. I normally have a smooth foam. I haven’t adjusted any setting on air or product. It’s like this in all bays. What’s even stranger is the fact that it’s sporadic. Its be foamy then not foamy then foamy...

Im doing count up with a $15 limit. I also have my CC priced slightly higher than cash to offset the fees.

I think I'll try one of each and compare them. I do wish the micro coins were repairable. Randy how much is it get a slug buster repaired?

Randy, is this what you use? https://www.kleen-ritecorp.com/p-3309-parker-engineering-p-83-short-drop-slugbuster-iii-coin-and-token-acceptor-with-ez-open-chassis.aspx

Randy, I’ve never used slugbusters before. I’ve only used IDX’s. That what my wash came with and I had pretty decent luck out of them plus I was able to send them in and get them repaired for a reasonable price. I don’t think that’s an option anymore as I believe IDX has gone out of business or...

Can someone help with the wiring on the microcoin. I have been using MA 850s and thought I would try the microcoins out. The MA 850s have a black, yellow, and (2) red/yellow wires. the Microcoins have a black, yellow, green and blue.

Is this what you're using? Are they able to be repaired? https://www.kleen-ritecorp.com/p-61453-microcoin-ql-style-electronic-coin-acceptor.aspx#description

I used to send these off and get them repaired by IDX. Are they still in business? If not does anyone else repair them?

Soapy, I was thinking about doing the exact same thing. 2 lights per bay seems like plenty to me. Did you need any additional parts to make the 4 light package KR sells work for 2 bays? Maybe an additional power adapter? Do you feel like there is a difference in mounting the lights on the wall...

Anyone ever used G&G before? What’s your opinion on them? Is there a better option available? I’ve used Wallpacks in the past but they don’t seem to last all that long. https://www.kleen-ritecorp.com/p-60264-g-g-wet-location-driverless-direct-ac-32-ft-led-lighting-package-120-v.aspx

I accidentally locked the lower lock and walked out. My locL locksmith is on vacation. No one from out of town will travel this far. Can anyone give me advice on drilling this thing out? The deadbolt isn’t locked. Only the knob.

After spending all day on the phone yesterday I believe we got the issue diagnosed. I took the heads apart, took the injectors out, cleaned out the brine tank a couple of times, ran several regen cycles. We finally figured out that the float in the brine take is only intermittently working which...