Recent content by Pap

MGSMN - We have three other doors in operation that do not have the counterweights and operate normally. The motor has been replaced twice and this door was a year old in January. I appreciate the idea and will review it with the distributor, thanks! Waxman - Given the door was less than a...

Unfortunately, the error returned again last night. My distributor had me disable the banner door sensors today. I am doubtful this will resolve the issue, however, we are running out of options. Any other thoughts or suggestions would be appreciated. Thanks everyone

Jsshac - I thought the exact same thing last Sunday and I greased the heck out of it...hasn't had the error since 🤞. Thanks for continuing to provide suggestions, greatly appreciated!

Eckert16 - We are in Western Pa and while it has been cold simply pressing the stop button clears the F.PF error and the door will return to functioning normally. Jsshac - The doors are not catching on the reset brackets. We don't have counterweights. The door is not frozen to the ground as...

Great thought, unfortunately we swapped out the entire control cabinet including the buttons and that did not resolve the issue either. Thanks for the reply!

Sparkey - P108 is set to a value of 100. The doors are not freezing to the floor as we have radiant floor heat. Undertaker II - Yes we have replaced those as well. MC3033 - There are the standard Banner eyes attached to the frame, however, they are not interfering as they are mounted on the...

We purchased the XRS doors with a new IBA we installed a year ago. Approximately 11 months after the installation, we have run into an occasional issue with the exit door which has created a major problem. After the wash package has been completed the exit door begins to open about 30 inches...

Thanks Greg

Soonermajic The Oasis rep will at our wash this Friday. Thanks for the suggestion!

Hi everyone, After considering all the factors of our bay limitations, the machine's capabilities, as well as the distributor's support for our area, we believe we have our replacement IBA ranked with the top two machines being the Freestyler and Flex 5. The 3rd & 4th choices would be the Ryko...

Thank you everyone for your input! This information is certainly going to be very helpful to us. Thanks again!

We have an old Autec EV1 that needs to be replaced. I have only been in the business for 6 years and this will be my first replacement. The bay is 34' which limits our options. PDQ & Wash World bowed out of the running due to the bay length. I'm currently looking at the Freestyler, Mark VII...