Recent content by ARueck

Do you pour the 1/2 cup foamer right into the concentrate product?

The readers are $10CDN/month, plus fees. Have not solved the issue yet.... not getting enough power to the relay to turn it on still.

Wondering what product people are using for their low pressure presoak in SS? Obviously looking for good show, and good result...

Hi Bob - interesting you had the same problem - can you give me a little bit more info on how you fixed the voltage problem? Thanks!

I believe it is 8 Volt DC going from the Nayax to the relay. Maybe that's not enough to power the relay?

I really appreciate the help - seems that we may not know how to wire this relay properly - neither does Nayax or the other various companies we have talked to. When we hook up the Nayax to the A1 and A2 lug, and then attached the NC to the 24 VAC time and COM to "Hot", the motor of the pump...

24V is going to the relay. From the Nayax side of the relay, a VCC wire to the A2 port of the relay, a pulse wire to the A1 port. From the relay to the timer, we were putting the COM to the 24 VAC "Hot" of the timer, and NO to the 24 VAC timer post.

You could be right - the only reason why I'm hesitant on that is because we have used 3 different relays - under the same assumption that we were using a faulty relay (even though 2/3 were brand new)... I have attached a picture of the relay we are using, if you find any value in that

We are testing a new Nayax Amit 3.0 with a VPOS card reader using the "Count-Up" function. Our Nayax is programmed correctly, but the relay that is wired between the reader and the timer is not switching once a card is read and approved (LED light comes on the relay, but does not switch from...