Search results

MEI coin acceptor model CF 7000. Cassette model DCA. this unit needs to be refurbished. It started putting coins in the wrong tubes and not giving change etc. I replaced it with a different brand so I don't need this one anymore. If you want to throw me a few bucks on top of the shipping you...

Had a welding shop install flex pipes on my daughter's Volvo. They did a nice job with the flex pipes and a short section of new exhaust. They forgot to install the skid plate so After I put on new front brakes yesterday I decided to install the skid plate. It was then I noticed how they...

I bought a new Lorex camera system for my car wash when I did my remodel and just got around to putting up the cameras about a year ago. I love everything about the system except for the fact that the cameras in my automatic wash get moisture inside and then they look blurry like the photo...

The display on my AMS sensit 2 is very dim and I would like to remedy that. In your experience should I replace the entire display with a new one as well as the lens that covers it or do you think just the lens would be adequate? Thank you.

I went to tractor supply to buy a half inch nonworking male by female swivel. I was already frustrated because I sent an employee there to get it and despite being helped by store personnel he came back empty-handed. I knew they had it so I went myself. I went back to the section where the...

New / never used. 8 1/2" x 32". blue. 2 wire. $50 plus shipping. Txt David: 413-658-4010 thanks!

I got tired of buying distilled water for my detail shop steamers, so I did some research and bought a water distiller for $105 on Amazon. No more trips to Walmart for jugs of water. No more plastic jugs. Unit makes a gallon in 4 hrs so I will set it to make water after hours.

I would like to get some plastic 3-D letters for the front of my car wash building. The choices are staggering. Can anyone help me narrow down the selection to a few that you like and have used at your own place? Thanks in advance.

hi everyone. One of my apartment buildings requires a monitored FIRE ALARM panel system. I had one installed a couple years ago and the electrician set it up for the company that he is familiar with for the monitoring. It's not a huge expense but seems like a lot to me for what you get...

what's the absolute Best steamer for car detailing in your opinion? I've tried two different mighty steamers both aren't very good. Problems with steam generation and reliability plague these units.They weren't cheap to purchase and I'm pretty disappointed with their overall performance and...

hi everyone. I have an almost 20 year old Laurel three column electronic vending machine. The display is going bad and I need a new circuit board which includes the display. The new display is larger than the old display by a little bit and would not all be shown in the existing cut out in the...

Hi Everyone My flag pole at the car wash broke off in the wind, narrowly missing a used car I had on my lot! I want to replace it and my thought is to get 3 flags / poles. One American flag on a 12' pole in the middle, flanked by 2 10' poles , one with a Massachusetts state flag and one with...

Is Dencar the only retrofit door system to upgrade the Goldline cashiers? I'm thinking about being able to offer buy-ups etc. Thanks!

One of my vacuums intermittently clicks constantly and I can't figure out why. I have a slug buster two coin acceptor and an IDX timer. The little metal piece that detects the coin when it goes through the chute is constantly clicking back-and-forth randomly. When I move the face plate a certain...

my announcement speaker in my automatic bay went bad and I ordered a new one. These speakers are expensive. Has anyone had any luck repairing them and keeping them on the shelf for a spare?

My shurvend was not accepting coins properly; nickels going into dime tube, quarters going into dollar coin tube, etc. I went to the manual for the MARS coin acceptor and found the info I needed. There are multiple different configurations you can get the coin cassettes in. Mine was...

I bought a new FS curtis air compressor a little while back for my detail shop. The belt broke a couple days ago so I put a new one on. I didn't notice right away that the motor pulley and the pump pulley were not properly aligned, so the belt wound up twisting itself as it ran. The compressor...

The Canadian wildfires are creating visibly hazy skies and poor air quality here in New England. Is this likely to create more dirty cars? Is this a 'what goes up must come down' scenario, with ash and soot falling on vehicles and increasing our car wash business? Maybe I'm just looking for a...

does anyone have any experience with a rollover polish machine? I'm wondering about the pros and cons, the maintenance required, things to consider when purchasing.The auto butler unit i'm Looking at is about $68,000 new and I have found them refurbished and in Nice looking condition for about...

I installed this at one of my apartment buildings today. I've got a great sign guy who created the decals. I used the old sign that came with the building and repainted it with black oil based paint. The bracket was made my my local welding shop because I couldn't find anything I liked online.